Internal Height – 5’11” (1.8m) clear headroom at eaves rising to 6’10 (2.09m) or 7’3” (2.2m)at apex depending on width of shed
External Height- 6’2” (1.88m) rising to 7’5” (2.26m) or 7’10” (2.39m) at apex
Cladding – 12mm (ex-16mm) 5th grade or better Scandinavian redwood pine machined to tongue and groove “v” jointed profile (T.G.V.)
Framework – 38mm x 63mm C16 (construction) grade pine
Roof – 45mm x 95mm ridge beam. The roof cladding is 12mm T.G.V. over 45mm x 32mm frame with at least 2no. 32mm x 45mm tie beams as appropriate. The roof is covered with 20kg per square meter polyester based green mineral felt (we don’t use fibre based felt)
Floor – 18mm exterior grade plywood over 32mm x 45mm floor bearers creating 32mm of airflow between floor and shed base
Door – 30” (760mm) wide, 5’10” (1780mm) tall. Fully framed with 5 horizontal ledges, clad with 12mm TGV double nailed at every ledge. Fitted with 3 no. 10” “T” hinges
Treatment* – basecoat treated with Chroma 2005 timber preservative to all external surfaces. All fixings and fastenings are plated against corrosion

Shed size: All our shed sizes are taken as an average. The floor would be 4” under the quoted size and the body of the shed overlaps the floor by 1” all the way round. The body of the shed is 2” under the quoted size and the roof overlaps the body, it is 2” over the quoted size. For a 10’ x 8’ shed: The roof is 10’2” x 8’2” The body is 9’10” x 7’10” The floor is 9’8” x 7’8”

*Although we know that the basecoat treatment has excellent preservative qualities it is not considered by us to be a waterproofing treatment. Your shed will need to be given a coat of a waterproofing treatment after it has been installed. If you would prefer, this can be done for you prior to delivery using Barretines Premier Wood preserver which is spirit based.