Pent Shed Specification Sheet

Internal Height – 6’ (1.83m) at the back rising to 6’6” (1.98m) at the front
External Height- 6’3” (1.9m) at the back rising to 6’9” (2.05m) at the front
Cladding – 12mm (ex-16mm) or 16mm (ex19mm) 5th grade or better Scandinavian redwood pine machined to tongue and groove “v” jointed profile (T.G.V.)
Framework – 32mm x 45mm rounded four corner, C24 graded
Roof –The roof cladding is 12mm T.G.V. over 45mm x 32mm frame with 32mm x 45mm tie beams as appropriate. The roof is covered with 20kg per square meter polyester based green mineral felt (we don’t use fibre based felt)
Floor – 12mm or 16mm T.G.V. over 45mm x 32mm beams. Can be made heavier duty if required
Door – 30” (760mm) wide, 5’10” (1780mm) tall. Fully framed with 5 horizontal ledges, clad with 12mm TGV double nailed at every ledge. Fitted with 3 no. 10” “T” hinges. Double doors are 26” wide each
Treatment* – basecoat treated with Chroma 2005 timber preservative to all external surfaces.

All fixings and fastenings are plated against corrosion

Shed size: All our shed sizes are taken as an average. The floor would be 4” under the quoted size and the body of the shed overlaps the floor by 1” all the way round. The body of the shed is 2” under the quoted size and the roof overlaps the body, it is 2” over the quoted size.

For a 10’ x 8’ shed:
The roof is 10’2” x 8’2”
The body is 9’10” x 7’10”
The floor is 9’8” x 7’8”

*Although we know that the basecoat treatment has excellent preservative qualities it is not considered by us to be a waterproofing treatment. Your shed will need to be given a coat of a waterproofing treatment after it has been installed. If you would prefer, this can be done for you prior to delivery using Barretines Premier Wood preserver which is spirit based.